Description	How to dive it?

Dive 1: From Insenborn, end of the road

• GPS water access waypoint: N49° 54.371' E5° 53.177' (INSEN1B)
• dive 300° down to the river bed (depth ca. 28m)
• there change direction to the left along the left side of the river bed
• after about 8min you will see the first pillar of the bridge, as well as the height mesure scale for previous water level immediately at the beginning of the pillar
• to access the second pillar, dive 315° through the river bed starting from the first one in your back

Dive 2: From Insenborn, first parking area, by foot down the street leading into the water

• GPS water access waypoint: N49° 54.243' E5° 52.956' (INSEN2)
• dive oblique slowly deeper and deeper for about 10min
• then turn left and dive straight to the old river bed (depth ca. 26m)
• follow the right side of the old river bed until you reach the first pillar at about 18min dive time
• to access the second pillar, dive 315° through the river bed starting from the first one in your back

Note: The second dive possibility is quite a long dive and needs very intense orientation sense, so that a successful dive is not guaranteed.